35
10
Data Logger
Starting The Data Logger Software
Start the K-SYSTEMS data logger software from the programs list or by double-clicking the desktop
icon.
NOTE:
If no incubator is connected, or if the incubator is switched off, the following error message
is shown.
Connecting Multiple Incubators
The K-SYSTEMS datalogger software version supports up to three incubators connected to a single
computer.
1.
Connect the first incubator to the PC and start K-SYSTEMS datalogger software. The
datalogger software automatically recognizes the incubator attached and will display the port
name associated with the incubator. The port name is used for identification purposes
2.
Connect the second incubator to the PC and launch a new instance of K-SYSTEMS datalogger
software. The datalogger software automatically recognizes the second incubator attached and
displays the port name associated with the incubator
3.
Repeat step 2 for connecting a third incubator
Summary of Contents for K-Systems G185 SensorTech
Page 55: ...55 11 Troubleshooting...
