18
6
G185 SensorTech
The sensor is placed in the rear part of the filter holder. It measures the gas circulating in the
incubator. The opening is closed by use of a plug as standard.
G185 SensorTech has a hidden hole for a pin-type temperature sensor.
The opening is in the aluminum block on the left side,
between chambers 1 and 2. It is designed for a 3mm
diameter sensor.
The sensor can be used to detect temperature changes in
the G185.
This sensor works as an addition to the sensors inside the
G185 and should not be used for calibration purposes.
Port for external CO
2
Sensor
Hole for external temperature sensor (Pin Type)
External Temperature and CO
2
Monitoring
The CO
2
sensor recommended is a widely used sensor from Vaisala
(GMP 251). It is a 0-10% high precision IR CO
2
sensor.
Vaisala offers several devices to support this sensor; both stand-
alone and built-in modules.
Summary of Contents for K-Systems G185 SensorTech
Page 55: ...55 11 Troubleshooting...
