Plato Complete Guide V1.3.0
Convert Technologies
16
2.3.4.
Connecting your speakers via 4mm banana plugs
These connections only apply to Plato models with an integrated power amplifier.
For models without this option, see following section 2.3.5: ‘Connecting to external
amplifier’.
For best results use equal length speaker cable for both left and right outputs
Note that when connecting the speaker cables, always connect the speaker terminals before
plugging in the banana plugs to Plato.
Connect both left and right speaker to the rear of your Plato unit.
The connection to your speaker will vary according to speaker type. See typical types of
speaker connections below.
4mm Binding posts for banana plugs
2.3.5.
Connecting to an external amplifier
This applies for Plato models without the integrated power amplifier option.
Use Phono cables from the Pre Out connections on the rear of the Plato unit to connect to
an external power amplifier and speaker system.
