XW-210 WiFi™ Users Manual
6.4 Email Notification
6.4.1 Email Notification Description
XW-210 can be configured to send messages to eight email addresses when certain events occur.
Events that can trigger email messages include relay/input state changes and temperature/humidity
changes.
When an email message is sent, it looks similar to this:
XW-210
Trigger: Relay 1 ON
Relay 1: ON
Input 1: OFF
Count 1: 5.00
Sensor 1: 76.2° F
Sensor 2: 73.7º F
Sensor 3: 32.0º F
Sensor 4: 84.5º F
Note: Relays, Inputs, and Sensor names as well as ON and OFF status text may be customized by the
user (installer) in the setup pages. The same field names are used on the Control Page.
Subject Line
The top line (that reads XW-210), appears in the subject line of the email message. This is the same text
that appears as the header on the
Control Page
. It is set in the Main Header Text field under the
Control
Page Setup
tab.
Trigger
The first line displayed in the body of the message shows the event that triggered the message. The text
“Trigger” will always appear and cannot be changed. The remaining text includes the trigger name, and
what caused the trigger. The text that describes the trigger and its current state are configured in the
setup pages as described below.
Current Status of the Digital Inputs, Relays, and Sensors
The remainder of the email message will display the same information shown on the
Control Page
. If the
Short Message option has been selected, only the I/O that triggered the email will be shown.
Xytronix Research & Design, Inc.
Page 63
Summary of Contents for WebRelay Wireless XW-210I
Page 1: ......
