XW-210 WiFi™ Users Manual
Page
. Up to 15 characters may be entered in this field. The default text is “PULSE”.
On Status Text
The text in this field specifies the text that will be displayed in the
Control Page
and in email messages
when the relay is On. Up to 15 characters may be entered in this field. The default text is “On”.
On Status Color
This field specifies the color that will be displayed on the
Control Page
when the relay is considered On.
Options are Green, Red, Yellow, Blue and Grey. The default color is Green.
Off Status Text
The text in this field specifies the text that will be displayed in the
Control Page
and in email messages
when the relay is Off. Up to 15 characters may be entered in this field. The default text is “Off”.
Off Status Color
This field specifies the color that will be displayed on the
Control Page
when the relay is considered Off.
Options are Green, Red, Yellow, Blue and Grey. The default color is Red.
Pulse Duration
When XW-210 receives a pulse command for the relay (through the web page or through a command),
the relay will pulse for the time specified in this field. Note that when a pulse command is sent through
the command interface (XML or ModBus), the command can include a pulse time which will over-ride
this value (for that pulse only). The time is specified in seconds and can range from
0.1
seconds to
86400
seconds in 0.1 second increments. The default time is
1.5
seconds.
Relay State at Power up
This drop down menu lets the user specify the state of the relay when the XW-210 is powered up. The
following options can be selected:
Off:
The relay will be off upon power up (this is the default setting.)
On:
The relay will be on upon power up.
Evaluate Logic:
Upon power up, the control source and action are evaluated to determine the
proper state of the relay.
Control Source
These drop down menus specify what input or sensor controls the state of the relay. The following
options can be selected:
None:
The state of the relay will be controlled only by the web page.
Digital Input:
The state of the relay will be controlled by the digital input and/or the web page.
1-Wire Sensor:
The state of the relay will be controlled by a 1-Wire Sensor and/or the web
page.
Depending on the Control Source selected, the menu will change.
If
Digital Input
is selected the following Action options are available:
Set relay equal input
:
When the input is on, the relay is on. When the input is off, the
relay is off.
Set relay opposite of input
:
When the input is on, the relay is off. When the input is off,
Xytronix Research & Design, Inc.
Page 43
Summary of Contents for WebRelay Wireless XW-210I
Page 1: ......
