Appendix A: Specifications
XW-210 WiFi™ Users Manual
Appendix A: Specifications
Wireless Specifications
Network Standards:
IEEE 802.11b/g/n
Frequency Band
2.412 – 2.462 GHz
Wi-Fi Security Standards
Open, WEP, WPA, WPA2
Network Settings:
DHCP or Static
Wireless Range
Up to 250ft (typical for Wi-Fi devices) depends on environment
RF Output Power (typ)
14dBM (802.11b/g), 12dBM (802.11n)
Antenna:
External, 2.4 GHz, 50Ω, omni directional, 1/4 wavelength,
gain: ≤ 2.1dBi. With articulated reverse SMA connector.
Operation
Provisioning:
Via internal web server (no cables or PC utilities needed)
Access Point:
Yes, push button activated (setup via web page)
WPS:
Yes, push button activated (Wi-Fi Protected Setup)
Connectivity:
Always connected
Remote Server:
ControlByWeb's X-600™ or cloud-based server
Remote Relays:
Control relays on other ControlByWeb™ products
Polling:
state.xml (web-server is always active)
Power Requirements
Input Voltage:
9-28 VDC
Current:
See table below for typical values at 25°C
Test Conditions
9VDC
12VDC
24VDC
AP Mode
relay Off and input Off
68mA
51mA
31mA
Attempting to connect to AP
relay Off and input Off
68mA
52mA
36mA
Connected to AP with network traffic
relay Off and input Off
65mA
50mA
28mA
Connected to AP with network traffic
relay On and input Off
185mA
140mA
72mA
Connected to AP with network traffic
relay Off and input On
75mA
57mA
31mA
Connected to AP with network traffic
relay On and input On
188mA
143mA
75mA
Push Buttons
Button 1:
Force access-point mode
Button 2:
Activate WPS mode
Relay Contacts
Load Type:
General purpose
Contact Form:
SPDT (form C)
Contact Material:
Silver Nickel
Max Voltage:
277 VAC (general purpose)
30 VDC (NC contact, resistive)
Page 86
Xytronix Research & Design, Inc.
Summary of Contents for WebRelay Wireless XW-210I
Page 1: ......
