Web Server
XW-210 WiFi™ Users Manual
Section 4: Web Server
The internal web server presents two classes of web pages;
Setup
pages and
Control
pages.
Setup
pages are used by an installer to provision and configure the XW-210. The
Control
page allows the relay
to be controlled and displays temperature and digital input status information.
To access the
control
page, enter the following URL in the address bar of a web browser:
http://192.168.1.2
To access the
setup
pages, enter the following URL in the address bar of a web browser:
http://192.168.1.2/setup.html
Note that if you are accessing the unit as an access point the above IP address will work even if you
have changed the IP address in the setup pages. If you are accessing the unit through the network after
it has been configured you will use the IP address that was assigned to the device.
If the XW-210 has been added to a network using WPS, it will use DHCP and you will need to use the IP
address assigned to it. This can be found in the DHCP server, or by using mDNS. The mDNS name is:
http://xw-210.local/
When using the setup pages, you must click the
Submit
button at the bottom of a page if you have made
changes to a setting on the page.
4.1 Main Tab
This is the initial page that is displayed when
setup.html
is entered in the address bar of the browser.
It displays model and serial number information, and has navigation tabs which allow access to the
configuration and setup settings. Each of the configuration settings are described in the following
sections.
Page 22
Xytronix Research & Design, Inc.
Summary of Contents for WebRelay Wireless XW-210I
Page 1: ......
