Dinverter
A
User Guide
Issue code: d2au9
66
Changing the setting of a bit parameter
When a bit parameter is selected and Edit mode entered, the display appears
as shown in Figure 5–10. The letter
b
at the left of the display indicates
bit
.
0
or
1
is displayed at the right. If security is not preventing access, the
parameter can be edited. This is indicated by the
0
or
1
flashing.
When
0
is displayed, press
to select
1
.
When
1
is displayed, press
to select
0
.
Figure 5–10 Changing the setting of a bit parameter
Selecting a parameter in an advanced menu
1
Unlock standard security (see
Introduction to the security system
and
Security procedures
in Chapter 9
Security
).
2
Enter Parameter mode. The display alternately shows the menu and
parameter number.
Menu number
Parameter number
Figure 5–11 Display in Parameter mode
3
Momentarily press at the same time
and
. The menu number
changes to 1. Repeat the action to select the required menu number.
If the menu number does not change, this indicates that standard
security has not been unlocked (see
Security procedures
in Chapter 9
Security
).
4
To select a lower-numbered menu, press
and
5
To scroll through the menu numbers, hold down the keys.
