Dinverter
A
User Guide
Issue code: d2au9
62
Note that when the display is in Edit mode, it will not return to Status
mode after eight seconds. You can spend as much time as required
changing the value of a parameter.
Figure 5–4
Display in Edit mode showing the value of a parameter
2
The value shown in Figure 5–4 is the maximum value of
0.06
. In this
case, the value can only be decreased. To decrease the value,
momentarily press:
Notice that the value of the flashing digit decreases by one as shown in
Figure 5–5. You can repeat this step as many times as required.
Figure 5–5
Decreasing the value of a parameter
3
Press and hold down
Notice that the value scrolls downward. Release the key when the
required value is reached. The new value takes effect immediately.
To increase the value, press
4
When the required value is displayed in Edit mode, press
5
The display returns to Parameter mode. If no keys are pressed within
eight seconds, the display enters Status mode.
Making large changes in value quickly
So far the value has been changed by incrementing or decrementing the
least significant digit. The speed of change can be increased by selecting,
then scrolling either of the more significant digits, as follows:
1
When the display is in Edit mode, momentarily press
and
at
the same time.
When the keys are released, the digit at the left of the least significant
digit flashes. This operation can be repeated to select the most
significant digit of the display. If this digit is not currently displayed, it
can still be selected. When selected, a bar appears in its place.
