Dinverter
A
User Guide
Issue code: d2au9
12
4
Installing the Drive
Warning
Adhere to the instructions
The mechanical and electrical installation instructions must
be adhered to. Any questions or doubt should be referred
to the supplier of the equipment. It is the responsibility of
the owner or user to ensure that the installation of the
Drive and any external option unit, and the way in which
they are operated and maintained, comply with the
requirements of the Health and Safety at Work Act in the
United Kingdom or applicable legislation and regulations
and codes of practice in the country in which the equipment
is used.
Installation in an enclosure
The Drive case conforms to IP10 or IP20 in accordance with
IEC529 (see Chapter 3
Data
). The Drive is designed for
installation in an enclosure
(type 1 as defined in UL508C,
Table 7.1) to protect the Drive from contamination.
Authorized access
The enclosure should prevent access by all personnel except
for authorized, trained service personnel.
Fire enclosure
The Drive case is not classified as a fire enclosure. To meet
this requirement, the Drive must be installed in a fire
enclosure.
Electric shock risk
The voltages present in the following locations can cause
severe electric shock and may be lethal:
AC
supply cables and connections
Output cables and connections
Many internal parts of the Drive, and external option
units
