Scanning
22
With WIDEsystem you can:
View the scanner
’
s status.
Move the mouse over the scanner icon on the
system tray. Status messages include whether or not the scanner is
detected, connection and runtime errors and readiness for scanning.
Ready
Scanner status message on Windows system tray
View Error messages and logs.
Runtime errors are reported immediately
on your screen. You can also open the
Status
tab and
Log
tab for viewing
error messages.
View information about the scanner device
in relation to firmware and
hardware revisions. Open the
Info
tab.
Install new firmware
–
You download new firmware to a folder on your
machine. Then right click on the scanner icon, select
Advanced Options >
Update Scanner Firmware
to install it on your scanner.
Initiate a scan of the system
’
s hardware bus
for re-establishing the
interface. Right click on the scanner icon, select
Advanced Options >
Rescan Hardware Bus
.
Assign/reassign applications to the scanner
’
s one-touch-scan
buttons
, or disable the one-touch-scan buttons altogether. Open the
One-
Touch
tab to make settings.
Set Automatic Power functions.
Timer
and
Enter Sleep mode
automatically
(after idle time) options
.
Set up your scanner so it can be shared by user PC
’
s on the network
.
Open the
Scan to Net
tab to make settings.
Set up your scan software so it can access shared scanners on the
network
. Open the
Scan to Net
tab to make settings. See also
Installation -
Share the scanner on the LAN
.
Launch the scanner maintenance program.
Right click on the scanner
icon, select
Launch Scanner Maintenance.
Launch the WIDEsystem on-line help.
To find instructions on trouble
shooting and using WIDEsystem with your scanner. Open WIDEsystem
and press the F1 key.
WIDEsystem program control interface
