Power ON/OFF
16
Wake and Sleep modes
With the main power switch ON, scanner power can be set in
Sleep mode
and
Wake mode
.
Sleep
mode is the energy saving mode. The scanner
cannot scan when in the
Sleep
mode.
Wake
mode is the full power ON
mode for scanner operation.
The scanner will go from
Wake
mode into
Sleep
mode:
Automatically: after a set idle time (see
Automatic Power functions
).
Automatically: with the Timer (see
Automatic Power functions
).
Manually: when you hold the power button down for 3 seconds.
The scanner will go into
wake
mode:
Automatically: with the Timer (see
Automatic Power functions
).
When you feed a document into the scanner.
When you press any button on the panel.
Sleep Mode (power
Wake Mode (power ON)
Advantages with using Wake-up and Sleep modes:
Ready faster:
You turn the scanner OFF and ON (sleep/wake-up) by
pressing the power key on the panel. The scanner skips its init sequence
and is ready to scan sooner than with
Main Power OFF
to
ON
.
Convenience
: When OFF (LED is red) the scanner can be powered up
(Wake-up) easily by pressing the power key or just by inserting paper into
the scanner, thereby indicating you wish to scan.
Timer function:
Scanner power with
Wake-up and Sleep
, can be setup
and controlled through the WIDEsystem software timer week schedule
feature or through an idle time setting.
Save energy:
Sleep mode runs at low power values.
Automatic Power ON/OFF functions
Scanners: HD5450, HD4250, HD4230, HD3650,
HD3630, HD2530
Automatic power management lets you schedule your scanner
’
s up-time
optimally and helps save energy.
You can set the scanner for automatic power OFF (Sleep) and power ON
(Wake-up). Automatic power management functionality is set and
controlled through your WIDEsystem software.
There are two automatic power functions:
1.
Timer
function
2. Enter Sleep mode automatically (after idle time) option.
In order to use automatic power management functionality: the
scanner Main Power switch at the scanner
’
s back must be turned ON.
The power LED on the operator
’
s panel will light red when the scanner is in
Sleep Mode (powered OFF) and green when in Wake Mode (powered ON).
Sleep Mode (power
Wake Mode (power ON)
