Board Setup
COM-2(PCI), COM-4(PCI), COM-8(PCI)
33
Support software
CONTEC does not provide driver software for MS-DOS or
Windows 3.1. If using the boards on MS-DOS, refer to the sample
programs in the DOS directory of the supplied FD.
Sample programs for MS-DOS
The sample programs for using the board under MS-DOS are
written in Microsoft C.
The attached FD contains following sample programs.
Table 3.1. Data Format
(ii) (iii) (iv) (vii) (viii)
(v) (vi)
Baud rate
9600bps
230.4Kbps
Data bits
Stop bits
Parity
None
Parameter
Data format
8 bits
2 bits
(i)
COMPCI.C
Resource check program
COMPCI.EXE
(ii) COMPCI01.C
Data transmission
COMPCI01.EXE
(iii) COMPCI02.C
Data reception
COMPCI02.EXE
(iv) COMPCI03.C
Interrupt-driven data reception
COMPCI03.EXE
(v) COMPCI04.C
Data transmission and reception
COMPCI04.EXE
(vi) COMPCI05.C
Interrupt-driven data transmission
COMPCI05.EXE
and reception
(vii) COMPCI06.C
Half-duplex data transmission
COMPCI06.EXE
(viii) COMPCI07.C
Half-duplex data reception
COMPCI07.EXE
DOS --- Samples ---
Figure 3.1. Sample Programs on FD
Summary of Contents for COM-2(PCI)
