Contec COM-2(PCI), User Manual

Page: 12 / 80

Introduction
COM-2(PCI), COM-4(PCI), COM-8(PCI)
5
About the Manual
This manual consists of the following chapters :
Chapter 1 Introduction
Chapter 2 Component Locations and Setting
This chapter explains the names of major parts on the
board and its switch setting.
Chapter 3 Board Setup
This chapter describes the procedures for setting up
the board.
Chapter 4 External Connection
This chapter explains how to connect external devices
to the board and gives notes on connecting them.
Chapter 5 I/O Ports and Registers
This chapter provides the assignment and definition of
each I/O port bit used for the board. Refer to this
chapter when writing driver software.
Chapter 6 System Reference
This chapter summarizes hardware specifications of
the board and provides circuit block diagrams.
Chapter 7 Index