Board Setup
COM-2(PCI), COM-4(PCI), COM-8(PCI)
24
resource settings.
Checking resources
Follow the steps below to check the assigned resources managed by
the OS.
(1) Double-click on the [System] option in [Control Panel] to open
the [System Properties] property sheet. Select the [Device
Manager] tab.
(2) Click on the [Multi-function adapters] folder.
(3) Click on the [CONTEC Co., Ltd.-COM-x(PCI)] folder to
display its properties.
(4) Select the [Resources] tab to check the device type, resource
settings, and the conflicting device list.
Precautions when using the API-SIO(98/PC)W95 bundled with
the API-PAC(W32):
To use the API-SIO(98/PC)W95 after installing the
hardware, install the API-SIO(98/PC)W95 from the
API-PAC(W32) and then run Config.exe.
API-SIO(98/PC)W95 can be used by a system's restarting after
choose [Tool] > [API-SIO] and set up board to use.
However, the board and another board can't used as standard COM
such as Hyper Terminal using API-SIO(98/PC)W95.
The API-SIO(98/PC)W95 cannot be used simultaneously
with another allocated standard COM.
Summary of Contents for COM-2(PCI)
