Consilium SELUX ST, Installation And Service Manual

Page: 82 / 180

RADAR CONFIGURATION
3.9 Rev. E
3.7 Antenna Settings
By pressing the “Antenna Settings " button the following window will appear:
Figure 3.7.1 Antenna Settings
Following the Help Line and the suggestion in the window should be easy to set the
correct values for antenna height and antenna Cartesian coordinates, which will be
important to draw the ship profile correctly, visible only at a low range scale.
The PPI will be centred on the cross representing the position of the Radar. The antenna
height is one of the parameters used to calculate the Anti Sea Clutter processing.
As consequence of this insertion a drawing of the ship's profile will appear at a low scale
in the centre of the PPI as follow
To configure a valid radar connection, the checkbox F should activated and the correct
antenna selected from the list A .
The PPR selection B is available only when the communication with the transceiver is in
parallel mode (all radar signals connected separated).
A
B
C
D
E
F