Consilium SELUX ST, Installation And Service Manual

Page: 79 / 180

RADAR CONFIGURATION
3.6 Rev. E
3.4 Own Ship Dim. And Weight
By pressing the “Own Ship Dim. And Weight " button the following window will appear:
Figure 3.4.1 Own Ship Dim. And Weight
Inside the window is possible to insert the following data:
•
Weight:
by pressing the relevant button a list will be open.
In this list there are 8 pre-defined Tonnage / ROT values selectable. The chosen selection
related to the tonnage of the ship will be used to define the Rate of Turn for the Trial
Manoeuvre computing.
Be sure to select a reliable value, otherwise the Trial Manoeuvre will give
completely wrong information;
Length:
look to the help line to correctly use the 3 Mouse Operating Push Buttons in order
to decrease, increase the length value or input a new length value in meters.
Width:
look to the help line to correctly use the 3 Mouse Operating Push Buttons in order
to decrease, increase the width value or input a new width value in meters.