Consilium SELUX ST, Installation And Service Manual

Page: 105 / 180

RADAR CONFIGURATION
3.32 Rev. E
3.15 Software Upgrade
Pressing the SW Upgrade push button the following menu will be displayed. If you need to
upgrade the software of the Selux console choose the Console Update file you are
interested to (normally the latest).
All Selux-ST software update packages are named as:
SeluxST-pkg-X.Y.-YEARMONTHDAY
Where X.Y usually is the version and revision of the main application program (MMI) and
the Year Month Day number identifies the creation time of the package. The zipped files
cannot be used and they should be decompressed before transferred in the memory
stick.
Other updates are available like the srt-update-X.Y.-YEARMONTHDAY and they will be
automatically recognized as upgrade files for the SRT and transferred accordingly.
Press the "USB Selection -> System" push button to start the Upgrade.
Another menu window will be displayed with two progress bars showing the state of the
upgrade on each processor of the Antares PCB (A and B).
The operator just needs to wait until the progress bars shows the notice "Success.
Software Updated".
Note that is possible to read the value 100% in the progress bar, but the upgrading
is not terminated until the notice previously notice appears.
To run the new software reset the system by the Restart button in the Radar Setup Menu
or just by resetting the Antares Assy.