Consilium SELUX ST, Installation And Service Manual

Page: 83 / 180

RADAR CONFIGURATION
3.10 Rev. E
3.7.1
Adjustment of Azimuth Type (PPR Selection)
Pressing the
B
button in of Fig 3.7.1 a list will be open with all the possible azimuth
values.
The list below shows all the standard and some special configurations with the relevant
PPR:
NOTE
If the communication with transceiver has already been established, if the
Heading Line pulse is being received and if it has been correctly set, is
possible to read the PPR value measured by he system, in the on the
label on left side of the PPR selection (between parenthesis). This is the
easier and faster way to insert the correct PPR setting.
Antenna
Pedestal
Sensor Type PPR
1XP
Proximity
Switch
132
1XP Encoder Kit 1024 to 4096
SU L Antsig 128
SU Encoder Kit 1024 to 4096
12/25 UP L Antsig 128