Consilium SELUX ST, Installation And Service Manual

Page: 31 / 180

INSTALLATION AND SETTING
1.14 Rev. E
Monitor synchronism timings according to the resolution
Resolution
1280x1024
Resolution
1600x1200
Resolution
1680x1050
Resolution
1920x1200
Dot Clock
110 MHz 110 MHz 120 MHz 130 MHz
Horizontal Period
15.56 us 16.36 us 15.33 us 16 us
Horizontal Sync
1.67 us 0.908 us 266 ns 246 ns
Horizontal Front
Porch
392 ns 416 ns 364 ns 336 ns
Horizontal Back Porch
1.86 us 496 ns 704 ns 652 ns
Vertical Period
16.41 ms 19.96 ms 16.56 ms 19.76 ms
Vertical Sync
46.4 us 164 us 92 us 96 us
Vertical Front Porch
15.6 us 48.8 us 45.6 us 48 us
Vertical Back Porch
410 us 116 us 324 us 418 us
Table 1.10.2 – Monitor timings
1.11 Radar Console Failure Output
For installation where a continuous check of the radar console operability is
mandatory a failure output is available.
The FAIL output is located on TB1 over the Alpha PCB and it is a NC contact
that can supply more than 100mA of current (see Input/Output specification at
this Chapter’s introduction).
A special electronic circuit on the Antares PCB acts continuously as a watchdog
to detect any operational failure that can cause a processor malfunction.
For this reason and also when the console is powered-off the contact switches
to closed condition.