39
11. Operation
Setting the DMX starting address
• Press the button MODE (1) until the display (4) shows “d”. “d” means that the device is in DMX mode.
• Briefly after this, the display (4) shows the DMX starting address.
• Set the desired starting address with the buttons UP (2) or DOWN (3). The starting address is assumed after approx.
3 seconds and displayed alternatingly with the “d”.
• Once a DMX signal is received from the connected DMX controller, and LED appears at the right side below the
“d” in the display (4).
• In this operating mode, the effect light covers 16 DMX channels. Their functions are listed below.
• The DMX signals from the controller are output unchanged at the DMX OUT (6) port, so that subsequent effect lights
are controlled synchronously.
DMX channel functions:
DMX channel
DMX values
Spot
Function
CH1
000-255
1
Brightness red
CH2
000-255
1
Brightness green
CH3
000-255
1
Brightness blue
CH4
000-127
1
Overall brightness
128-227
1
Flashing effect, slow > fast
228-255
1
Full brightness, no flashing
CH5
000-255
2
Brightness red
CH6
000-255
2
Brightness green
CH7
000-255
2
Brightness blue
CH8
000-127
2
Overall brightness
128-227
2
Flashing effect, slow > fast
228-255
2
Full brightness, no flashing
CH9
000-255
3
Brightness red
CH10
000-255
3
Brightness green
CH11
000-255
3
Brightness blue
CH12
000-127
3
Overall brightness
128-227
3
Flashing effect, slow > fast
228-255
3
Full brightness, no flashing
CH13
000-255
4
Brightness red
CH14
000-255
4
Brightness green
CH15
000-255
4
Brightness blue
CH16
000-127
4
Overall brightness
128-227
4
Flashing effect, slow > fast
228-255
4
Full brightness, no flashing
