Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 72 of 82
8.2.1
Documentation
The results of inspections and the measures taken are to be documented in written reports.
Conductix-Wampfler must be informed immediately of any defects or malfunctions that occur during the test phase and within
the warranty period.
8.2.2
Replacement of the ProfiDAT
®
Antenna
Required tools:
Allen key, SW5
Work steps:
Pull the current-collecting head (1) down and out of the ProfiDAT
®
profile (2).
Fig. 63: Loosening screws
Loosen the 2 hexagonal-socket-headed screws (3) (without removing them).
Fig. 62: Remove the current-collecting head from the ProfiDAT
®
profile
1
1
3
2
