Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 20 of 82
2.6.7
Emergency Stop
The ProfiDAT
®
data transmission system is used for transparent transmission of safety-relevant signals. These signals must be
generated by a higher-level component. Suitable safety components must be used to guarantee the emergency-stop function. The
emergency stop must be implemented using safety equipment provided by the customer and depends on the nature of the power
supply.
We recommend the use of a PROFIsafe system.
2.6.8
Hazard Areas
WARNING!
Risk of injury due to moving components!
When the system is operating, severe injuries can result if persons or objects are within the
movement range (hazard area!).
Do not start the system if there are persons or objects within the movement range
(hazard area!).
Exception: Repair and maintenance work. Traversing is only permitted at
reduced speed.
Make sure that the system cannot start up in an uncontrolled manner.
Do not reach into moving parts.
Block off the hazard area around the entire system.
WARNING!
Risk of injury due to moving components!
Serious injuries may occur if the system is moved in an uncontrolled manner.
Block off working and hazard areas.
Do not reach into moving parts. The interfaces between current collectors and rail-
fastening equipment are particularly dangerous.
CAUTION!
Crushing hazard due to stored energy!
When working on the current collector, there is the risk of crushing extremities due to
uncontrolled movements as a result of the energy stored in the spring.
The spring force must be taken into consideration, during all works on the current
collector. Do not reach between profiles and current collectors (see Fig. 1).
During installation, maintenance and repair works: Check the spring force with
caution.
