Condair US 13, Operation And Maintenance Manual

Page: 4 / 74

6.2.7 Service 32
6.2.8 Changing Your Settings 33
6.2.8.1 Change the period between flushing cycles. 33
6.2.8.2 Activate the Ultrasonic Blower Pack. 33
6.2.8.3 Change how the large humidifier reacts to demand. 33
6.2.8.4 Use the humidifier at X% capacity. To set up and configure the manual capacity
control type.
33
6.2.8.5 Humidify the space at X% setpoint, based on a control signal. 33
6.2.8.6 Put the humidifier on standby. 33
6.2.8.7 Change the fan speed of the nebulizing module. 34
6.2.8.8 Change the LCD display settings. 34
6.2.8.9 Change the system language. 34
6.2.8.10 Restore factory defaults. 34
6.2.8.11 Reset the service reminder (remove the service warning). 34
7 Operation 35
7.1 General 35
7.2 Inspecting the Unit 36
7.3 Starting Up 36
7.3.1 Restarting the Unit 36
7.4 Shutting Down the Unit 37
7.5 Remote Monitoring 37
7.6 Draining the Unit 37
8 Maintenance 38
8.1 General 38
8.2 Cleaning and Disinfecting 38
8.2.1 Diluting your Disinfecting Solution (H2O2) to 0.1% 39
8.3 Maintenance List 40
8.4 Maintenance Procedures 43
8.4.1 Removing and Installing the Door Panels 44
8.4.2 Cleaning, Removing, and Installing the Water Reservoir 45
8.4.3 Removing and Installing the UV Assembly 47
8.4.4 Replacing the Transducers (Piezoelectric) 48
8.4.5 Removing and Installing the Drain Valve 50
8.4.6 Replacing the Air Intake Filter 52
8.4.7 Replacing Fuses 52
8.4.8 Replacing the Transducer Driver Board 56
8.4.9 Replacing the Battery 57
9 Troubleshooting 59
9.1 Fault Indication 59
9.2 Warning and Fault List 59
9.3 Resetting Fault Status 61
Contents | 4
2588787_B_EN_2005_US_OM
US