Comtrend Corporation AR-5381u User Manual Download Page 42

Page: 42 / 206

DHCP Server Relay

: Enable with checkbox



and enter DHCP Server IP address.

  This allows the Router to relay the DHCP packets to the
  remote DHCP server. The remote DHCP server will provide
  the IP address.

This option is hidden if NAT is enabled

or when the router is configured with only one Bridge
PVC.

LAN INTERFACE

To configure a secondary IP address, tick the checkbox



outlined (in

RED

) below.

IP Address: Enter the secondary IP address for the LAN port.
Subnet Mask: Enter the secondary subnet mask for the LAN port.

Ethernet Media Type

Configure auto negotiation, or enforce selected speed and duplex mode for each
Ethernet port.

Summary of Contents for AR-5381u















































































































































































































Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands

Comtrend Corporation AR-5381u, User Manual

Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands