Comtrend Corporation AR-5381u User Manual Download Page 130

Page: 130 / 206

129

8.1.3 Restore Default

Click

Restore Default Settings

to restore factory default settings.

After

Restore Default Settings

is clicked, the following screen appears.

Close the browser and wait for 2 minutes before reopening it. It may also be
necessary, to reconfigure your PC IP configuration to match any new settings.

NOTE:

This entry has the same effect as the

Reset

button. The AR-5381u board

hardware and the boot loader support the reset to default. If the

Reset

button is continuously pressed for more than 60 seconds, the boot loader
will erase the configuration data saved in flash memory.

Summary of Contents for AR-5381u















































































































































































































Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands

Comtrend Corporation AR-5381u, User Manual

Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands