Comtrend Corporation AR-5381u, User Manual

Page: 153 / 206

152
D1.2 PTM Interfaces
Follow these procedures to configure a PTM interface.
NOTE : The AR-5381u can support two PTM interfaces.
STEP 1: Go to Advanced Setup

Layer2 Interface

PTM Interface.
This table is provided here for ease of reference.
Heading Description
Interface WAN interface name.
DSL Latency {Path0}

portID = 0
PTM Priority Normal or High Priority (Preemption).
Connection Mode Default Mode – Single service over one interface.
Vlan Mux Mode – Multiple Vlan services over one interface.
MSC Mode – Multiple Services over one interface.
QoS Quality of Service (QoS) status.
Remove Select interfaces to remove.
STEP 2: Click Add to proceed to the next screen.
NOTE: To add WAN connections to one interface type, you must delete existing
connections from the other interface type using the
remove button.
Default PTM interface Quality of Service can be configured here, including Scheduler,
Queue Weight and Rate Limit.