Comtrend Corporation AR-5381u User Manual Download Page 124

Page: 124 / 206

123

6.7 Station Info

This page shows authenticated wireless stations and their status. Click the

Refresh

button to update the list of stations in the WLAN.

Consult the table below for descriptions of each column heading.

Heading

Description

MAC

Lists the MAC address of all the stations.

Associated

Lists all the stations that are associated with the Access
Point, along with the amount of time since packets were transferred
to and from each station. If a station is idle for too long, it is
removed from this list.

Authorized

Lists those devices with authorized access.

SSID

Lists which SSID of the modem that the stations connect to.

Interface

Lists which interface of the modem that the stations connect to.

Summary of Contents for AR-5381u















































































































































































































Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands

Comtrend Corporation AR-5381u, User Manual

Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands