Comtrend Corporation AR-5381u User Manual Download Page 68

Page: 68 / 206

5.8 Quality of Service (QoS)

NOTE

QoS must be enabled in at least one PVC to display this option.

(See

Appendix D - Connection Setup

for detailed PVC setup instructions).

5.8.1 Queue Management Configuration

To Enable QoS tick the checkbox



and select a Default DSCP Mark.

Click

Apply/Save

to activate QoS.

QoS

and

DSCP Mark

are defined as follows:

Quality of Service (QoS):

This provides different priority to different users or data

flows, or guarantees a certain level of performance to a data flow in accordance with
requests from Queue Prioritization.

Default Differentiated Services Code Point (DSCP) Mark:

This specifies the

per hop behavior for a given flow of packets in the Internet Protocol (IP) header that
do not match any other QoS rule.

Summary of Contents for AR-5381u















































































































































































































Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands

Comtrend Corporation AR-5381u, User Manual

Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands