Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2
40
Chapter: Overview - FX Series
Section: FX Series Appliances Data Sheet
MN-FXSERIESADM6 Rev 6
Data Sheet Notes:
(a)
When used as an ADC, the FX-1005 will handle 3000 concurrent sessions.
(b)
Maximum accelerated WAN rates are a function of compressibility. If all content is being GZIP
compressed with a ratio of greater than 4:1, the maximum WAN rate may not be accelerated.
(c)
The number of images handled per second is a function of image size.
FX-4010-ADC
FX-1005-ADC
Image Size
Images Per Second
Images Per Second
10
KB
1800
80
50KB
1000
35
500KB
100
35
(d)
Available as either a stand-alone feature or part of the WAN optimization product. As a stand-
alone feature, the maximum data rate is 700 Mbps, when purchased with the WAN optimization;
the data rate is limited to the WAN optimization rate.
(e)
Packets per second (PPS) is 50% outbound and 50% inbound. Header compression is currently
only available in point-to-point configurations and is not currently supported in the FX-1010.
Header Compression is currently available as either a standalone feature added to the base
configuration or part of the WAN Optimization product. When purchased without the WAN
Optimization feature the maximum rate is 700KBps. When included with WAN Optimization, the
data rate is limited to the WAN Optimization rate.
1.8.3
Configuration Models
The Base Configuration with QOS only is an option with no WAN Optimization.
Option 1 Add Header Compression (rates up to700KBps) with no WAN Optimization.
Option 2 Wan Optimization including Header Compression with rates as shown in the tables.
