Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2
114
Chapter: FX Series Status
Section: FX Series ADC Status
MN-FXSERIESADM6 Rev 6
6.1.1
FX Series ADC WANOP Monitor
This page provides a real time view of vital ADC statistics.
Figure 6-2 FX Series ADC WANOP Monitor Screen
Real-Time Statistics
CPU (%):
This represents the CPU utilization of the FX Series ADC for all system tasks.
Memory usage (%):
The percent of RAM being consumed by the ADC including both the WAN optimization service and the
operating system is shown. When this value approaches 90%, the ADC will automatically reduce its
memory resource consumption to prevent service disruption.
Active Flows:
The number of UDP and TCP connections currently flowing through the FX ADC and also the maximum
capacity is shown. If the current number of active flows reaches 99% of capacity, then the FX will either
go into “Fail-To-Wire” mode or not allow new connections to be established.
HTTP objects retrieved:
This shows the number of objects that the FX Series ADC retrieved from the target HTTP web servers.
HTTP server hits saved:
The number of times that the back-end HTTP server did not need to service an HTTP request because it
was handled out of the FX Series ADC cache. This tally also includes savings generated by the advanced
caching of the client acceleration software.
