Compuprint 9058 User Manual Download Page 59

Page: 59 / 85

Configuring the Printer

A78408098-005

How to Lock/Unlock the Access to the Printer
Setups

To prevent not expertise persons changing the printer setup parameters, it is
possible to lock/unlock the access to the printer setups as follows:

•

Press

ON LINE

MACRO

and

SHIFT

keys at the same time and keep them

pressed while powering the printer on. As soon as these keys are released, the
following messages will be displayed:

9058

9058D

then,

MENU LOCKED

Now the access to the printer setups is locked. If the

PROGRAM

key is pressed, the

LOCKED MENU

message is displayed (the

PROGRAM

key is disabled).

•

If you decide to unlock the printer setup, turn the printer off, then press the

ON LINE

MACRO

and

SHIFT

keys at the same time and keep them pressed

while powering the printer on again. As soon as these keys are released, the
following messages will be displayed:

9058

9058D

then,

MENU UNLOCKED

Summary of Contents for 9058






















































































Search results

Summary of Contents for 9058

Reviews:

Related manuals for 9058

Brands by name

Popular brands

Compuprint 9058, User Manual

Search results

Summary of Contents for 9058

Reviews:

Related manuals for 9058

Brands by name

Popular brands