Configuring the Printer
A78408098-005
21
Printer Configuration
The main printer setup parameters can be selected via the operator panel.
The setup parameters are divided into the following two printer menus. The
Power-On Configuration, that allows a complete configuration at installation
time according to the hardware and the emulation types, and the Program
Setup that allows you to set the functions that are the most useful in your
daily job. These settings can be selected when the printer is in online without
printing or offline (
READY
indicator unlit). These settings can be stored in
the NVM.
Entering the Printer Setups
•
Press the
PROGRAM
key and keep it pressed at the printer power on until
the
RELEASE KEY
message is displayed to select the Power-On
Configuration.
•
Press the
PROGRAM
key when the printer is online without printing or
offline (
READY
indicator unlit) to select the Program Setup.
Moving within the Printer Setups
The arrow keys
↑
,
↓
,
←
,
→
are used to move within the different functions
inside the Printer Setups. See the following description of the Setups for a
detailed description of the key to be used in the various positions inside the
Printer Setups.
Leaving the Printer Setups
•
In the Power-On Configuration, pressing the
PROGRAM
key the
printer exits from the menu and the new settings will be
automatically saved.
•
In the Program Setup, pressing the
PROGRAM
key, the following
choice is offered for the storage of the values set:
STORE? QUIT
The new settings are not activated and the old
settings remain valid.
STORE? SAVE
The new settings are stored permanently in the NVM
(Non Volatile Memory).
STORE? CURRENT
The new settings remain valid until the printer is
turned off.
Press the
→
or
←
keys to scan these selections forward and backwards.
When the desired setting is displayed, press the
PROGRAM
key to exit from
the menu.
