Compuprint 9058 User Manual Download Page 51

Page: 51 / 85

Configuring the Printer

A78408098-005

Tear-Off Mode

LOWER PUSH

↑

TEAR NORMAL

→

←

TEAR AUTOM.

→

←

LABELS

→

←

NO TEAR

→

←

↓

STRONG IMPACT

TEAR NORMAL

The Tear-Off Function is performed pressing the

ONLINE

key when the printer is offline .

TEAR AUTOM.

When the printer is not receiving any data, the paper
is moved to the Tear-Off position. It is returned to the
Tear-Off position as soon as it receives printing data.

LABELS

This item must be set when printing on labels, in
order to avoid paper jams. The paper does not execute
any backward movement.

NO TEAR

The paper does not execute any backward movement.

See also “How to Use the Tear-Off Function” later in this manual.

Print Impact Strength

TEAR NORMAL

↑

STRONG IMPACT

→

←

SOFT IMPACT

→

←

↓

PERFOR. SAFE NO

STRONG IMPACT

The impact strength of the print head is set for printing
on multicopy paper.

SOFT IMPACT

The impact strength of the print head is set for printing
on single paper or few copies. The printing noise is
reduced.

Summary of Contents for 9058






















































































Search results

Summary of Contents for 9058

Reviews:

Related manuals for 9058

Brands by name

Popular brands

Compuprint 9058, User Manual

Search results

Summary of Contents for 9058

Reviews:

Related manuals for 9058

Brands by name

Popular brands