Compuprint 9058 User Manual Download Page 42

Page: 42 / 85

Configuring the Printer

A78408098-005

TEXT DIRECT UNI

→

←

↓

GRAPH DIRECT BI

Selects the print direction for text.

Graphics Print Direction

TEXT DIRECT BI

↑

GRAPH DIRECT BI

→

←

GRAPH DIRECT UNI

→

←

↓

BAR CODES UNI

Selects the print direction for graphics.

Bar Codes Print Direction

GRAPH DIRECT BI

↑

BAR CODES BI

→

←

BAR CODES UNI

→

←

↓

P. ON PATH MACRO

Selects the print direction for bar codes.

Paper Path at Power-On

BAR CODES UNI

↑

P. ON PATH MACRO

→

←

P. ON PATH LAST

→

←

↓

MENU ENGLISH

P. ON PATH MACRO

The paper path at power-on is the one from the default
Macro.

P. ON PATH LAST

The paper path at power-on is the last one that was
selected before the printer was powered off.

Selection of the Language of the Display Messages

P. ON PATH MACRO

↑

MENU ENGLISH

→

←

MENU ITALIANO

→

←

MENU FRANCAIS

→

←

MENU ESPANOL

→

←

MENU DEUTSCH

→

←

↓

FUNCTIONS

Summary of Contents for 9058






















































































Search results

Summary of Contents for 9058

Reviews:

Related manuals for 9058

Brands by name

Popular brands

Compuprint 9058, User Manual

Search results

Summary of Contents for 9058

Reviews:

Related manuals for 9058

Brands by name

Popular brands