Setting Up Your Printer
A78408098-005
10
3.
The upper push tractor must be installed as shown in figure.
4.
If you need to remove the upper push tractor, turn the printer off. Take
the connector cable off and press on the internal levers (located in the
upper push tractor hooks) to disengage the tractor.
Host Computer Connection
This printer can be connected to your host computer via two available
interfaces:
•
A bidirectional IEEE1284 parallel interface
•
A RS-232C/422C serial interface
Before connecting the interface cable, make sure that the printer and the host
computer are turned OFF .
Insert the parallel interface cable into the parallel connector and fasten it by
means of the clips.
Insert the serial interface cable into the serial connector, and fasten it by
means of the two screws (use the screwdriver).
