Removal and Replacement
5–4 DIGITAL PowerStorm 1000 Graphics Subsystem Owner's Guide
5.3 Front Bezel
Perform the following procedure to remove the front bezel from the PowerStorm 1000
graphics subsystem deskside chassis:
1. Grasp the top of the front bezel on each side and pull out until the top of the bezel
unsnaps from the catches.
2. Tilt the top of the front bezel out and lift up to remove the front bezel from the chassis
(see Figure 5-1).
To replace the front bezel, align the tabs at the bottom of the front bezel with the slots at
the bottom front of the chassis, then swing the top of the bezel up and push it onto the
front of the chassis until it snaps into place.
Figure 5-1 Removing the Front Bezel
ML014212