Compaq A3000, Getting Started

Page: 62 / 68

•
•
•
•
•
Appendix 58
Industry Canada
compliance statement
This Class B digital apparatus
meets all requirements of the
Canadian Interference-Causing
Equipment Regulations.
Avis de conformité aux
normes d’Industrie
Canada
Cet appareil numérique de la
classe B respecte toutes les
exigences du Règlement sur le
matériel brouilleur du Canada.
European Community
(EC) directives
conformity
This product is in conformity
with the protection
requirements of EC Council
directives 89/336/EEC and
73/23/EEC on the
approximation and
harmonization of the laws of
the Member States relating to
electromagnetic compatibility
and safety of electrical
equipment designed for use
within certain voltage limits.
A declaration of conformity
with the requirements of the
Directive has been signed by
the the assigned parties within
Compaq Computer
Corporation.
This product satisfies the Class
B limits of EN 55022 and
safety requirements of EN
60950.
Japanese VCCI Notice
The United Kingdom
Telecommunications
Act 1984
This apparatus is approved under
the approval number
NS/G/1234/J/100003 for the
indirect connections to the public
telecommunications systems in
the United Kingdom.
Energy Star
The EPA ENERGY STAR
Computers program is a
partnership effort with
computer manufacturers to
promote the introduction of
energy-efficient products and
to reduce air pollution caused
by power generation.
Companies participating in this
program introduce personal
computers, printers, monitors,
or fax machines that power
down when they are not being
used. This feature will cut the
energy used by up to 50
percent. Compaq is proud to be
a participant in this program.
As an Energy Star Partner,
Compaq Computer
Corporation has determined
that this product meets the
Energy Star guidelines for
energy efficiency.
Power supply
information
If your power supply fails,
replace it with the Compaq
replacement part or other UL
LISTED Direct Plug-In Power
Unit marked “Class 2" and rated
30 Vdc at 830 mA.
Safety information
• If your product is NOT
marked with this symbol ,
it MUST be connected to an
electrical outlet that is
properly grounded.
• The power cord must be
connected to an electrical
outlet that is near the product
and easily accessible.
• Refer service or repairs, other
than those described in the
operating instructions, to a
professional service person.
• This product is designed,
tested, and approved to meet
strict global safety standards
with the use of specific
authorized components. The
safety features of some parts
may not always be obvious.
The printer manufacturer is
not responsible for the use of
other replacement parts.