Compaq A3000, Getting Started

Page: 34 / 68

•
•
•
•
•
Chapter 4 30
Using different paper types
The quality of your copies will depend on the type of paper
you use. In most cases, you will use plain copy paper. If
you use glossy paper (for photos) or transparencies, you
should change the A3000 paper type setting. To change the
paper type:
1 Press the Menu button until Paper: appears on the LCD
display.
2 Use the Up and Down arrow buttons to select your paper
type, either Plain , Glossy , or Transp. (for Transparency).
Note:
The Glossy paper type is only available when using the Color
Copy mode.
3 When finished, you can press the Start button to make
your copies, or press the Menu button again to change
additional settings. Press the Cancel button to cancel the
copy operation altogether.
Note:
For more information on paper types, See “Loading specialty
papers” on page 21.
Copy paper size
By default, the A3000 is set to use Letter sized (8 1/2” x
11”) paper for copies. To change the copy paper size
setting:
1 Press the Setup button. The first menu will be Copy Size.
2 Use the Up and Down arrow buttons to select your copy
paper size, either
LTR for Letter size, or A4 for the A4
paper size.
Note:
Although you can print on other paper sizes, these are the only
two paper sizes supported for making copies.
3 When finished, you can press the Start/Yes button to make
your paper size selection, or press the Menu button again
to view additional setup menus. Press the Cancel/No
button to retain your original paper size setting.