Compaq A3000, Getting Started

Page: 32 / 68

•
•
•
•
•
Chapter 4 28
Changing the copy mode
The LCD will display the current copy mode, either
BLACK or COLOR . To change the mode, press either the
Black Copy or Color Copy button.
Note:
Once you are in the BLACK copy mode, pressing the Black Copy
button will make a black copy, just as if you had pressed the
Start button. Likewise, pressing the Color Copy button while in
the COLOR copy mode starts a color copy.
Adjusting the quality
You can select from three different copy qualities for each
copy mode.
To adjust the quality of your copies:
1 Press the Menu button until Quality: appears on the LCD.
2 Use the Up and Down arrow buttons to make your
selection. Choose from Draft, Normal, or Best.
3 When finished, you can press the Start button to make
your copies, or press the Menu button again to change
additional settings (described below). Press the Cancel
button to cancel the copy operation altogether.
Use Draft quality for quick copies, Normal quality for a
good balance between speed and quality, and Best quality
for the best copies you can make.
Note:
The Best quality setting will take longer to print, but the printing
quality is excellent.
Additional copy settings
To help you make the best quality copies possible, the
A3000 allows you to adjust several other copy settings.
Your copy settings will remain for a couple of minutes
after the last copy completes printing. This allows you to
continue making copies with the same settings. If there is
no activity, the settings will revert to the defaults.