Compaq A3000 Getting Started Download Page 54

Page: 54 / 68

•

Chapter 7

•

The back sheet feeder tray is securely latched on both
sides. If you are not sure, open the tray by pressing on
both latches, and then close it again by snapping the tray
back into place.

•

The left paper guide does not cause the paper to bow in
the sheet feeder, and that it also prevents the paper from
moving side to side.

•

The A3000 is on a flat, level surface.

There is a paper jam

Try removing the paper from the sheet feeder. If the paper
is lodged too far into the A3000 and cannot be removed:

Press the Power button to turn the unit Off.

Pull firmly on the paper to remove it. If you cannot
reach the paper, lower the front cover and pull the
paper out.

Close the front cover.

If the paper has jammed in the paper input tray:

Open the tray by pressing down on both latches. For
help lowering the tray, See “Loading paper” on
page 17.

Lowering the tray should give you enough access to
reach the paper.

Close the the paper input tray by snapping it into place.

Press the Power button to turn the A3000 On.

Resend your document to print.

Envelopes or specialty papers do not feed

If regular paper feeds without problems, make sure:

•

You are loading the envelopes correctly. For help, see
“Loading specialty papers” on page 21.

•

You are using a supported envelope size, and it is
selected in Printer Properties.

Summary of Contents for A3000





































































Search results

Summary of Contents for A3000

Reviews:

Related manuals for A3000

Brands by name

Popular brands

Compaq A3000, Getting Started

Search results

Summary of Contents for A3000

Reviews:

Related manuals for A3000

Brands by name

Popular brands