INS_CNVETX1_REV– 06/10/13 PAGE 94
INSTALLATION AND OPERATION MANUAL
CNVETX1
TECH SUPPORT: 1.888.678.9427
Reset to Factory Defaults
An authorized user can reload the factory defaults. This resets the board to the original factory
default settings.
After selecting this option the board is restarted and your Web browser automatically redirects to
the About page.
This operation resets all board parameters to their factory default values including IP Address
and passwords. All configured information is lost.
To reset to factory defaults:
1. In the left pane select the System menu, and from the sub-menus select System Administration
and then Factory Defaults.
The right pane displays the Factory Defaults area.
Figure 91: Reset to Factory Defaults
2. Select Reset to Factory Defaults.
The message "This action will require starting the board. Continue?' appears.
3. Select OK to confirm.
4. Wait for reset to finish. When the reset is finished the About page is displayed.
All of the parameters of the application have been restored to the factory settings including video
and network parameters.
The following table lists the factory default settings.
