Comnet CNVETX1 Installation And Operation Manual Download Page 111

Page: 111 / 122

INS_CNVETX1_REV– 06/10/13 PAGE 111

INSTALLATION AND OPERATION MANUAL

CNVETX1

TECH SUPPORT: 1.888.678.9427

To configure the URL settings:

1. Select the Profile Name.

2. Enter the Server IP address.

3. In the URL text box enter the URL RTSP command.

4. From the Video Standard drop down list select NTSC or PAL video standard.

5. Select Save.

Display Configuration

The Display Configurations menu is used to configure the display configurations settings. The
display configurations settings are the single view and the Profile name.

In Single View 16 different profiles or channels can be chosen.

One audio channel can be selected.

To configure display configuration settings:

1. From the Video Source drop down list select one of the 16 profiles:

Figure 105: Video Source, Selecting Profile

2. Select the audio box to enable audio.

3. Select Save.

Summary of Contents for CNVETX1



























































































































Search results

Summary of Contents for CNVETX1

Reviews:

Related manuals for CNVETX1

Brands by name

Popular brands

Comnet CNVETX1, Installation And Operation Manual

Search results

Summary of Contents for CNVETX1

Reviews:

Related manuals for CNVETX1

Brands by name

Popular brands