INS_CNVETX1_REV– 06/10/13 PAGE 61
INSTALLATION AND OPERATION MANUAL
CNVETX1
TECH SUPPORT: 1.888.678.9427
to 51. The range of Q Max and Q Initial is 25 to 51.
›
VBR:
Q Min: lowest quantization value. The default is 20
Q Max: highest quantization value. The default is 51
›
CBR:
Q Min: lowest quantization value. The default is 0
Q Max: highest quantization value. The default is 51
Q Initial: initial quantization value. The default is 28
›
CONSTANT_Q:
Q Initial: initial quantization value. The default is 28
6. Select Save.
Configuring the MJPEG Video CODEC
You can set the MJPEG video CODEC setting of Q for the cameras. The range for the quality
adjustment is 1 to 99. The default setting is 75. At a higher setting, the bit rate will be higher.
Quality settings above 75 will result in higher bit rates with little gain in quality and are therefore
not recommended.
To set the MJPEG parameters:
1. In the left pane select the Streaming menu, and from the sub-menus select Video and then
MJPEG.
The right pane displays the MJPEG Parameters area.
Figure 54: MJPEG Settings
2. For each camera, In the Quality text-box enter a Q value for the camera between 1 and 99.
3. Select Save.
