INS_CNVETX1_REV– 06/10/13 PAGE 81
INSTALLATION AND OPERATION MANUAL
CNVETX1
TECH SUPPORT: 1.888.678.9427
Each node comes with a pre-set and globally unique MAC address. You cannot modify this
address.
Note: All ComNet Video Servers will be detected by this utility.
Changing the IP Address
The following procedure illustrates how to change the IP Address of the CNVETX1 from its default
address of 192.168.10.1.
To change the IP address of the board:
1. Choose the Network Settings sub-menu from the System menu.
2. Enter the username
admin
and the password
admin
when prompted.
This password is required for all menu items except “About”, and can be changed by selecting
“Change User PW”.
3. Select OK; the Network Settings screen appears.
You should see the current IP Address of the CNVETX1 (192.168.10.1).
4. In the Network Settings area you can configure the CNVETX1 for your network. For this
example change the IP Address to 192.168.10.45.
5. Select Save when done to confirm your new settings. Press on Select here to reset the board.
Figure 77: New IP Address and Reset Prompt
6. Select OK in the confirmation message window to reset the encoder.
Note: It is normal for the reset to take up to a minute to complete.
