Comnet CNVETX1 Installation And Operation Manual Download Page 100

Page: 100 / 122

INS_CNVETX1_REV– 06/10/13 PAGE 100

INSTALLATION AND OPERATION MANUAL

CNVETX1

TECH SUPPORT: 1.888.678.9427

Figure 95: Local Recording Settings

3. Select Save to apply the settings and start the local video/audio recording. The recordings are

stored onto an internal media (MicroSD card).

Note: The Video Storage functionality is a factory installed option. It is not possible for the user

to add storage in the field.

Media Files

File Naming Convention:

Track name: Device ID-Month-Day-Year-Start time(HH.MM.SS)-End time-Trigger Type-Status

Status: Recording/Complete/Interrupted

Example:Camera1-Jun-14-2009-16.30-17.10-X-C.MKV

Device ID is configurable in the web GUI – Alphanumeric free text

File Validity after interruption: After a power failure, the file that was in recording process during
the power failure will still be viewable.

To access the recorded files:

4. Select on the Media Files sub-menu. A list of the recorded files is displayed.

5. These files can be downloaded or deleted from the browser using the hyperlinks in the last two

columns.

Summary of Contents for CNVETX1



























































































































Search results

Summary of Contents for CNVETX1

Reviews:

Related manuals for CNVETX1

Brands by name

Popular brands

Comnet CNVETX1, Installation And Operation Manual

Search results

Summary of Contents for CNVETX1

Reviews:

Related manuals for CNVETX1

Brands by name

Popular brands