INS_CNVETX1_REV– 06/10/13 PAGE 45
INSTALLATION AND OPERATION MANUAL
CNVETX1
TECH SUPPORT: 1.888.678.9427
Configuring Video Settings – Encoder Operation Mode
In the Video Settings menu select on Analog Video to specify the Video Standard, Brightness,
Contrast, Color, Hue, De-Interlace, and Noise Reduction. Possible video standards are PAL, and
NTSC. Each standard has a different image size and frame rate.
Figure 40: Video Standard Selection
To configure analog video settings:
1. In the left pane select the Video Settings menu, and from the sub-menu select Analog Video.
The right pane displays the Analog Video Settings area.
2. From the Video Standard drop-down list select the video standard for the camera.
3. You can set the brightness, contrast, and color to a value in the range 1 – 100.
4. You can set the hue to a value in the range -50 to +50.
5. Check the De-Interlace box to enable the De-Interlace function.
6. Check the Noise Reduction box to enable the Noise Reduction function.
7. Select the Video out display box to enable the video output operation.
8. Select Save.
