INS_CNVETX1_REV– 06/10/13 PAGE 42
INSTALLATION AND OPERATION MANUAL
CNVETX1
TECH SUPPORT: 1.888.678.9427
PTZ Camera Preset
Set and store preset locations (camera pan and tilt settings) for the cameras, and then recall them
with the ID spin box list on the graphical user interface preset area.
Figure 37: Preset Area
The number of presets allowed varies with the camera protocol selected and camera model. Refer
to Supported PTZ Protocols Parameter Range for the number of presets allowed per protocol.
describes each of the preset symbols.
Table 10: Preset Symbols
Symbol
Description
GoTo preset location
Define preset
Delete preset
To define a preset:
1. Select an ID.
2. Move the camera to the desired location by using the Pan and Tilt symbols.
3. Select the Define preset symbol.
4. Move the camera to a different location.
5. Select the GoTo preset location to jump to the preset defined.
To delete a preset:
1. Select an ID
2. Select the Delete preset symbol on the graphical user interface.
