Comnet CNVETX1 Installation And Operation Manual Download Page 90

Page: 90 / 122

INS_CNVETX1_REV– 06/10/13 PAGE 90

INSTALLATION AND OPERATION MANUAL

CNVETX1

TECH SUPPORT: 1.888.678.9427

Updating the Firmware

You can update the unit’s on-board firmware version. The software updates are provided as files
with the .tgz file extension.

To update the firmware:

1. In the left pane select the System menu, and select Firmware Upgrade.

The right pane displays the Flash Update area.

Figure 87: Flash Update Page

2. Select Browse button to select the file.

3. Select Update firmware to start the software update.

The unit starts writing the Flash memory. Operation was finished successfully is displayed when
the firmware has been updated.

4. Select Select here to restart the board. The About pane of the new version should appear

automatically within a minute.

Warning: Never interrupt the flash process in any way, as this may lead to a board that cannot

boot!

Summary of Contents for CNVETX1



























































































































Search results

Summary of Contents for CNVETX1

Reviews:

Related manuals for CNVETX1

Brands by name

Popular brands

Comnet CNVETX1, Installation And Operation Manual

Search results

Summary of Contents for CNVETX1

Reviews:

Related manuals for CNVETX1

Brands by name

Popular brands