INS_CNGE28FX4TX24MS(2,POE2/48)
04/30/18 PAGE 53
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX24MS(2,POE2/48)
TECH SUPPORT: 1.888.678.9427
Table 4-19. L2 Switching > Link Aggregation > LACP Port Settings
Item
Description
Port Select
Select a port for the LACP Port Settings. The listed available settings are: FE1-FE8, GE1-GE2.
However, the available settings are dependent on the connected LACP device and may not
be listed as displayed in the current figure.
Priority
Enter a variable (1 to 65535) to assign a priority to the defined port selec tion.
Timeout
Click the radio button to select a long or short timeout period.
Mode
Click the radio button to select the setting mode: Active or Passive.
Active: Enables LACP unconditionally.
Passive: Enables LACP only when an LACP device is detected (default state).
Apply
Click Apply to save the values and update the screen.
The ensuing table for LACP Port Information settings are informational only: Port Name, Priority,
Timeout and Mode.
4.5.4 802.1Q VLAN
The 802.1Q VLAN feature allows for a single VLAN to support multiple VLANs. With the 802.1Q
feature you can preserve VLAN IDs and segregate different VLAN traffic.
The 802.1Q VLAN tag feature encapsulates the 802.1Q VLAN tagging within another 802.1Q
VLAN tag. The outer tag is assigned following the AP group, while the inner VLAN ID is assigned
dynamically by the AAA server.
VLAN Management
The management of VLANs is available through the VLAN Settings page. Through this page you
can add or delete VLAN listings and add a prefix name to an added entry.
To access this page, click L2 Switching > 802.1Q VLAN > VLAN Management.
Figure 4-22. L2 Switching > 802.1Q VLAN > VLAN Management
